Design of a Domestic Soap Scrap Reuse Device

Design of a Domestic Soap Scrap Reuse Device

Brief : Design a hand powered device to combine and compact used soap
scraps into a large single bar.
The device is to be designed to reuse old scraps of soap, combine and squeeze them into new bars. It is thought that some sort of mechanical advantage will be required during the compacting or squeezing operation. So that very hard old scraps of soaps can be compressed , it is required that water is to added somehow during the combining / squeezing operation.
The device is to be designed for domestic use and as such it should be designed as a complete “Product”, something which could, and would be bought in a shop.
Detailed Specification
1) The device, when being operated, shall be able to be wall or table mounted.
2) When not in use, the device shall stow or fold into a 400mm x 150mm square, spacial volume, and have the facility to be hung/ stowed on a wall.
3) The device is to be hand powered alone to compress /compact the soaps.
4) The device shall use water as a means of softening the soap scraps.
5) The device during operation shall be water tight, and have filling and draining facilities.
6) The device shall be designed for ease of cleaning.
7) The device shall be safe to operate, and stow as in 2)
8) The device shall be designed for mass manufacture,100,000 units sold/ year
9) The selling price of the “ Soap Compactor Product” is to be £35 each based on 8)
10) The device is to be designed in accordance with British Standards for Domestic devices.
11) The total mass of the device is to be no greater than 2kg dry (without any water added)
12) The design must cater for right or left handed users.
Marking Scheme:
1) Conceptual Design ( overall design concepts) 20%
2) Detail design ( detail part design, design calcs. ,material choices,) 20%
3) Structural Analysis ( of a single element of your choice , by Catia) 20%
4) Cost Analysis (cost breakdown of designed and Standard parts) 20%
5) Technical Drawings ( 2D Assembly+BOM and 2 part drawings) 20%
Total 100%
Assignment Detail
The device or product shall be conceived from at least 5 concepts of which ONLY one is chosen by a Design Selection Table.
Once a concept has been chosen, you are required to do some design calculations to verify the feasibility of the concept.
Detail design then follows , whereby any structural analysis or other design calculations are performed.
Once the concept has been verified by design calculations, the design should be formally modelled up on any CAD system.
The design is to be realised using any Solid modelling package such as Solid Edge, Catia , SolidWorks Etc.

Design of a Domestic Soap Scrap Reuse Device

Sample Solution

determine irrationality of a suicide if there was no way possible of the individual knowing; it can only be judged if there was no attempt to get it from reliable sources (Battin 137-138). I think that Battin is inferring that not having the correct in Design of a Domestic Soap Scrap Reuse Device formation could mean they are unable to participate in rational thought process. Another assumption of suicide not being rational due to this criterion is caused by internal factors, such as depression where they can unknowingly suppress certain information (Brandt, cited in Battin 1995, 138). She counters this by stating that you can still have adequate information because the future may be already negative, even with a smaller view (Battin 138-139). Therefore, from her counterargument, she is countering any claims of narrow views that the opposition would try to argue by stating that an individual’s health status does not matter. Battin states that some would claim that suicide would be irrational if one committed it because of an unlikely future, but states t>

 

 

determine irrationality of a suicide if there was no way possible of the individual knowing; it can only be judged if there was no attempt to get it from reliable sources (Battin 137-138). I think that Battin is inferring that not having the correct information could mean they are unable to participate in rational though Design of a Domestic Soap Scrap Reuse Device t process. Another assumption of suicide not being rational due to this criterion is caused by internal factors, such as depression where they can unknowingly suppress certain information (Brandt, cited in Battin 1995, 138). She counters this by stating that you can still have adequate information because the future may be already negative, even with a smaller view (Battin 138-139). Therefore, from her counterargument, she is countering any claims of narrow views that the opposition would try to argue by stating that an individual’s health status does not matter. Battin states that some would claim that suicide would be irrational if one committed it because of an unlikely future, but states t>

Is this question part of your Assignment?

We can help

Our aim is to help you get A+ grades on your Coursework.

We handle assignments in a multiplicity of subject areas including Admission Essays, General Essays, Case Studies, Coursework, Dissertations, Editing, Research Papers, and Research proposals

Header Button Label: Get Started NowGet Started Header Button Label: View writing samplesView writing samples

Custom Written Work

Guaranteed on Time

Achieve the Grade You ordered